T200 HF COMMERCIAL ENERGY SAVER POWER FACTOR CORRECTOR WITH HARMONIC FILTERS

T200 HF COMMERCIAL ENERGY SAVER POWER FACTOR CORRECTOR WITH HARMONIC FILTERS
Product Code: T 200 HF POWER FACTOR CORRECTOR
Reward Points: 35
Availability: In Stock
Price: 249.99€

Available Options


Note For Shipping:

Qty:     - OR -   Add to Wish List
Add to Compare
Description Product Q & A Reviews (0)

Power Factor Corrector Energy Saving Device T 200 HF 3 Phase 90000W With Harmonic Filters

 

Basic Information for the power Saver T 200 HF 3 Phase 90000W (WITH HARMONIC FILTERS)

 

      The difference between this device and plain T 200  model is that this device is fitted with a heavy duty circuit breaker and harmonic filters. This device is 0.7kg heavier than plain T200. This kind of device is more suitable and suggested for use in places with a lot of electronic equipment. The product is made with high quality.  This device if installed in your main Circuit breaker in the entry point of the electricity of the house can Protects from :

  • fluctuation peaks,
  • improves the power factor near to 0.99,
  • Save electricity consumption (This condenser type power saver is  more efficient with inductive loads such as  receptor, motors, transformers, fluorescence lightin, air conditioners e.t.c
  • Provides superior elimination of harmful static electricity
  • Optimal Power Management
  •  Stabilize current

 

This is a power factor correction unit - energy saving product.
This is not a plug and play product. This device must be installed in the main circuit breaker in the entry point of the building from a qualified electrician. The installation of this product takes only few minutes.

Do not attempt to install this device by yourself if your knowledge about doing this is poor – DANGER FOR ELECTRIC SHOCK. DO NOT ATTEMPT TO TOUGH THE WIRES OF THIS DEVICE UP TO 2 MINUTES AFTER UNINSTALL THIS DEVICE SERIOUS DANGER OF ELECTRIC SHOCK

SHIPPING INFORMATION. : THE PRODUCT SHIPS FROM E.U. WITH REGISTER FREE SHIPPING, LESS THAN 10 DAYS DELIVERY FOR EUROPE, NO CUSTOMS BEST PRIZE FOR THIS PRODUCT ONLY 159.99. (IN STOCK ALSO SINGLE PHASE AND OTHER BIGGER DEVICES FOR COMMERCIAL USE. PLEASE EMAIL FOR DETAILS.) 

MODEL : T 200 HF

Three Phase Power Saver

WIRES : 5 Wires 6 mm (yellow – green for the earth, 3 red for the phases and a green wire for the Neutral)

SISE : 18X24.5X16 CM

NET WEIGHT : 4.750 KG (net weight of the product - not with package)

Weight Of Shipping Package : 6 + kg

BODY  : GREY COLOR, WATERPROOF DESIGN  (but not put into the water)

PACKING : BROWN HARD PAPER BOX AND BUBLE PAPER

CERTIFICATE : CE

ORIGIN PLACE OF MANUFACTURE : SHENZHEN  CHINA

Rated voltage : 90-450V AC                                                                  

Temperature: -6 to 75 Celsius Degrees

Rated Frequency: 50Hz to 60Hz

Load Power Consumption: Up to 90,000W 

USAGE : Power factor corrector, energy saving device

Compensation Capacity: 6 Kvar.

Warranty: 12 months    

 

Benefits for using this device 

·         Protects from fluctuation peaks

·         improves the power factor

·         Save electricity consumption (This condenser type power saver is  more efficient with inductive receptors, motors, transformers, fluorescent lighting air conditioners e.t.c).

·         Provides superior elimination of harmful static electricity

·         Optimal Power Management

·         Stabilize current

INSTALLATION

Note : This device must be installed in the main circuit breaker in the entry point of the building. This is not a plug and play product. Do not attempt to install this device by yourself if your knowledge about doing this is poor.

Installation Diagram is send together with the device. This device can be installed in minutes but installation is better to be made by a technician because installation requires partial opening of the building electrical main circuit breaker which can be extremely dangerous operation for untrained individuals and presents a risk of electric shock, injury or death. Installation of this device  is low  cost for a few minutes work.  Do not attempt to install this device yourself if your knowledge about doing this is poor.

Notes :

- The device is properly wired to avoid wrong contacts and cabling errors
- Must be fixed to the wall to prevent it from moving
- Install the device in a safe environment. The case design of the device is waterproof but is better to install it   in a dry place to protect from sun rays and rain (this devise is better to be installed in a ventilated box to protect from direct rain and weather for longer life)

DISCONNECTION OF THIS DEVICE

Internal discharge device fitted, wait at least 2 minutes after disconnection of this device from power supply before touch live parts of the unit  = SERIOUS DANGER OF ELECTRIC SHOCK

USE OF THIS DEVICE

This Device Is Suitable  for Residential & Small Business House, Office, Shop e.t.c. with three phase. (if you need single phase device is also available) If your electricity consumption is higher than usual in those places, or you need a device for business purposes, factory or large machines, email us to quote you for a higher capacity power saver devise.

Any questions about the product, product use or the installation are welcome.

Product Description

This single phase power saver stores the reactive power (non-working power) that would be otherwise lost. This allows your inductive motor load to push in and pull from the device, using the stored power, instead of asking for more from the utility. This process decreases your demand from the utility thereby decreasing your Kwh usage and lowering your bill each month!

All motors require a certain amount of reactive power (non-working power) from the utility to create the Electro-Magnetic-Field (EMF) around the motor to make it work. The problem is that  local utility delivers that reactive power to your home in higher quantities than needed in order to prevent power loss. Is impossible to calculate always  the real  needs . Your inductive load (motors) then uses what it needs and sends the rest back to your electric panel where it is "lost" - dispersed in heat never to be seen again. The problem with this equation is that you have paid for the lost electricity, because it's traveled through your meter and been measured.

This Power Saver stores the reactive power (non-working power) that would be otherwise lost. This allows your inductive motor load to push in and pull from the Power Saver using the stored power, instead of asking for more from the utility. This process decreases your demand from the utility thereby decreasing your Kwh usage and lowering your bill each month!

How it works :

This device controls and actively improves the power factor of the whole building. Works by adjusting the power rate of the supply entering in the building. For an optimal working, it must be set up in the closest possible from the entry point of the electricity source. The perfect place for the installation is the main circuit breaker of the building.

 

Write a review

Name:


Your Review: Note: HTML is not translated!

Rating: Bad           Good

Verification Code:



Customers Also Viewed
loading
  • BULLY MAX
  • BULLY MAX
  • BULLY MAX
Powered By OpenCart
Store Name : lookforueshop.com © 2019